Select either "jyu-student" or "jyu-staff" as the wireless network and click "Connect" Type in your JYU username password and click "OK". when using eduroam you will need to type your username as [email protected](e.g.
If you are not sure, please login the management page to double check.
I can't provide a screen shot to illustrate how to do that because I don't know if you are using the built-in Windows Wireless Zero Config, or a vendor specific utility for your unnamed Wi Fi card.
Make sure that the WLAN light is on or flashing, check the settings whether the SSID is broadcasted.
Due to data security reasons, it is highly recommended that you set the correct settings as instructed in this tutorial below. In case you have already connected to the jyu-student or jyu-staff -network, right click on the jyu-student / jyu-staff network and select "View connection properties". ) is to download and install a pre-made configuration file from: https://cat.eduroam.org/ (Click the button where it says "eduroam user: download your eduroam installer" and select "University of Jyväskylä" as the organization. In case you have previously connected to the JYU wireless network using Secure W2-program, change the Security type to "WPA2-Enterprise" and the Encryption type to "AES".
Then select "MS Windows 8" as your operating system and download & install the configuration file.) 1. Also select "Microsoft: Protected EAP (PEAP)" as the network authentication method. Check the following checkboxes: After this click "Configure" 8. Check the checkbox "Specify authentication mode" and from the dropdown menu select "User authentication" After this click "OK". Click "OK" once again so the settings are saved and enabled.